FUEL DELIVERY....

DELIVERED!

GO FAST BITS FX SERIES EFI FUEL PRESSURE̴Ì_REGULATORS FEATURE:

• 1:1 fuel pressure rise rate

• Double layer/double reinforced diaphragms with a burst strength exceeding 1000psi

• Teflon co-polymer seat with stainless valve to retain fuel pressure longer after shut down

• Spring pre-load adjustment screw is o-ring sealed and does not leak vacuum/boost

• Static pressures adjustable from 28psi to 72psi

• Completely serviceable

• Multiple body ports allow for a large variety of setup options

• Features̴Ì_2x -6 AN ports for fuel inlet/s, 2x 1/8‰ۡó�̴Ì_NPT ports for pressure gauge and/or ECU sensor, and̴Ì_1x -6 AN return port

GO FAST BITS FX SERIES EFI FUEL PRESSURE REGULATORS JOIN OUR̴Ì_EXISTING LINE OF SUCCESSFUL PRODUCTS, BUILT WITH THE̴Ì_SAME PRECISION, MACHINING QUALITY, AND RELIABILITY THAT̴Ì_IS THE FOUNDATION OF OUR REPUTATION.

From the 800Hp FX-S Street to the 1500Hp FX-R Race version, and whether̴Ì_you run pump petrol/gasoline, Ethanol, Methanol or Diesel, we have you̴Ì_covered no matter what your Fuel Pressure Regulator requirements are.

What sets us apart from the competition? Well, if you‰ۡó»re looking for an EFI̴Ì_Fuel Pressure Regulator that seals and behaves just like your factory unit but̴Ì_with the added reliability and high flowing capacity you require, then look no̴Ì_further than the FX-R.

How have we achieved this? Our engineers have spent countless hours̴Ì_developing a unique replaceable co-polymer valve seat. What does this̴Ì_mean? Conventional aftermarket performance Fuel Pressure Regulators̴Ì_typically utilize a metal-to-metal valve and seat which by nature will not̴Ì_positively hold pressure when your engine is shut down, which can make̴Ì_startup more difficult.

Here at Go Fast Bits, we have incorporated a softer, more compliant yet resilient̴Ì_material for the valve seat, which will always positively seal and hold fuel̴Ì_pressure on shut down, designed to give factory-like sealing and reliable̴Ì_startup, as well as superior fuel resistance suitable for Unleaded, Ethanol,̴Ì_Methanol, and Diesel fuels.

We also use a double layer diaphragm, which means we have twice the̴Ì_reinforcing material, and as a result the burst strength exceeds 1000psi!

The FX-R also offers multiple fuel inlet and gauge ports that̴Ì_allow for a wide range of fuel system setups beyond the usual inlet/outlet,̴Ì_including parallel fuel rail or returnless ‰ۡÌÝ̏deadhead‰ۡó� systems. The two gauge̴Ì_ports allow you to run a mechanical fuel pressure gauge AND an ECU fuel
pressure sensor if you want to.