INTRODUCING THE NEW GFB D-FORCE -̴Ì_THE DIESEL SPECIFIC ELECTRONIC BOOST CONTROLLER!

DEDICATED DIESEL BOOST̴Ì_CONTROLLER FOR NON-VNT̴Ì_(VARIABLE VANE) TURBOS

  • 50psi capability
  • Display boost in psi, BAR, kPa, or EGT in ̴åÁF or ̴åÁC
  • Closed-loop boost control strategy
  • 6 individually programmable boost presets
  • Scramble boost feature with remote switching
  • Peak boost recall feature
  • Auxiliary input (active scramble/boost preset)
  • Over-boost/over-temp warning ̴Ì_
  • Touch screen interface with simple menu navigation
  • Choose your screen color

CONTROL AND DISPLAY BOOST PRESSURE, THE GFB D-FORCE̴Ì_GIVES YOU THE ULTIMATE CONTROL OF YOUR BOOST!*

Add on EGT kit available to monitor EGT (part number 3830)

The D-Force story...

EASY TO INSTALL AND USE, THE D-FORCE GIVES YOU ULTIMATE CONTROL OF̴Ì_YOUR BOOST PRESSURE!*

Want to adjust boost for towing? Change it if EGT gets too high?̴Ì_Have multiple settings for different driving conditions? Bring boost̴Ì_on earlier or hold it longer?̴Ì_The D-Force can do all of this and more! Using a unique boost̴Ì_control strategy, The D-Force lets you adjust the boost rise rate, peak̴Ì_boost, and closed-loop correction. There are 6 boost presets (plus̴Ì_an extra one dedicated to the scramble feature) that you can set up̴Ì_with different boost parameters for different driving conditions, and̴Ì_then activate them on-the-fly or at the press of a button.The unique scramble feature can be set up for a variety of purposes. It̴Ì_can raise or lower boost when activated with the screen button, or via̴Ì_the auxiliary input using a switch, button, or ECU output.

For example, you could use it to lower boost pressure for safety by̴Ì_connecting it to an existing warning light, or instantly access high̴Ì_boost by pressing a button or flipping a switch.

The D-Force can also display Exhaust Gas Temperature (in ̴åÁF or ̴åÁC)̴Ì_and has a user-adjustable warning. This feature requires the EGT̴Ì_plugin module, which includes a stainless steel EGT probe and̴Ì_weld-on exhaust bung, along with the module to connect it to the̴Ì_D-Force wiring loom. The D-Force kit is available with or without the̴Ì_EGT plugin module, and the module is also available separately.

The controller interface is easy to use with touch-buttons and one touch̴Ì_menu navigation. The boost pressure units can be displayed̴Ì_in psi, bar, kPa, and the peak recall feature lets you see your peak̴Ì_boost after each boost event.

50psi capability!

Boost gauge displays in psi, kPa, or bar - Choose the gauge̴Ì_pressure units to suit your preference̴Ì_EGT display in ̴åÁF or ̴åÁC ‰ۡÌÝÌÕ show exhaust gas temperature and set a̴Ì_visible flashing LED if it gets too high (EGT plugin module required, supplied with part number 3007 or separately part number 3830)

Closed-loop boost control strategy - for the fastest possible boost̴Ì_rise rate and minimum drop off at high RPM, the adjustable closedloop̴Ì_logic helps prevent boost variations that can occur in different̴Ì_gears, RPM ranges and atmospheric conditions̴Ì_

6 boost presets, individually programmable - You can program 6̴Ì_different peak boost pressures and rise rates, then select on-the-fly.̴Ì_Use different settings for economy, power, safety, towing etc.

Scramble boost feature with remote switching capability -̴Ì_scramble boost activates a dedicated boost preset so that peak̴Ì_boost, rise rate, and closed-loop control can be specifically tailored̴Ì_to suit your needs when this feature is activated at the press of a̴Ì_button or flip of a switch. You can use scramble to lower OR increase̴Ì_boost pressure, AND change the spool-up rate and correction

Peak boost recall feature - Shows the peak boost achieved after̴Ì_each boost run

Remote input trigger - Connect the remote input wire to a switch,̴Ì_button, warning light or ECU output to change boost presets or̴Ì_activate scramble boost

Over-boost warning/cut - User adjustable warning to indicate if̴Ì_the boost pressure is too high and to cut the solenoid to lower boost̴Ì_and protect the engine̴Ì_

Touch screen interface with simple menu navigation - Capacitive̴Ì_touch screen and single-touch menu navigation makes setup̴Ì_exceptionally easy. Scrolling text also means you always know̴Ì_where you are in the menu

Choose your screen color - You can set the button illumination to̴Ì_any one of six different colors to match your car‰ۡó»s dash

D-Force kit with EGT module -̴Ì_Order Part # 3007

EGT module kit-̴Ì_Order Part # 3830

*Suitable only for turbos using a traditional wastegate, not VNT.

SKU 3006
Brand Go Fast Bits
Shipping Weight 4.0000kg
Unit Of Measure ea

Be The First To Review This Product!

Help other Boosted Performance Parts users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category